Golf L4-2.0L (BEV) (2004)
-
Check direction of flow of valve:
A Connections 1 - 1.
-
Flow in both directions
-
Connection -2- is closed
B Connections 1 - 2:
-
Flow in both directions
-
Connection -3- is closed
C Connections 1 - 2:
-
Flow in one direction
-
Connection -3- is closed
-
in case of vacuum at connection -1-, valve must close
Fig. 4 Installation position of screw-type clamp for fuel filter (vehicles with engine code AVH)
NOTE: Fuel filter is shown in illustration from the front.
-
Install screw-type clamps (arrow) as shown in illustration.
Make sure there is enough distance between clamp lock and fuel tank. Dimension "a" must be at least 5 mm.