Golf L4-2.0L (BEV) (2004)
Removing
-
Remove driver's side lower dash cover. Refer to Body and Frame.
-
Tension over-center spring with clutch pedal and fit retaining clamp 3317 from above.
Note:
-
Hole (arrow) faces toward clutch pedal.
-
Bring clutch pedal to rest position and take out over-center spring together with retaining clamp 3317.
Installing
-
Pull clutch pedal toward passenger compartment.
-
Insert over-center spring into rear mounting first (arrow -B-), then operate clutch pedal until the retaining clamp seats on the mounting lug of the
clutch pedal (arrow -A-).
-
Take out retaining clamp while moving clutch pedal to rest position.