Golf L4-2.0L (BEV) (2004)
-
Insert new seal - arrow - from repair kit into groove.
-
Install new cover to joint. Position the plate tabs on the grooved surfaces from joint - arrow - .
-
The holes of the cover and joint must align.
-
Install boot clamp.
Note: For a better alignment of the multi-point socket head bolts when mounting the axle shaft, it is necessary that the clamping ear of the clamp -
arrow A - is placed between the fixing flanges from the joint -arrow B - .
-
Tighten clamp with hose clamp pliers V.A.G. 1275 .