Golf L4-2.0L (BEV) (2004)
/Page-1480007.png)
Fig. 1 Pulling dished washer -A- out of output shaft
Fig. 2 Pressing dished washer -A- into output shaft onto stop
Fig. 3 Pulling tapered roller bearing outer race out of transmission housing
A - Counter support, e. g. Kukko 22/2
A - Internal puller 56 to 70 mm, e.g. Kukko 21/8
Fig. 4 Pressing tapered roller bearing outer race into transmission housing
^
Support transmission housing with press tool 40-20 directly below bearing mounting.
