Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-1072001.png)
Radio/Stereo Noise Filter: Service and Repair
AM Frequency Filter
AM Frequency Filter
Removing
Perform the following steps before starting:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
The rear lid trim panel must be removed first in order to be able to replace the AM frequency filter.
-
Remove the red circlip - 1 - in - direction of arrow - from the connector housing. Press the release - 2 - and disconnect the connector.
-
Do the same with the other two connectors.
-
Remove the 3 screws - arrows - and remove the frequency filter.
Installing
Install in reverse order of removal.
