Golf L4-2.0L DSL Turbo (CJAA) (2010)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Cover
Front Bumper Cover
-
Remove radiator grille.
-
Remove the bolts - 4 -.
-
Remove screws - 2 - (pointing upward) on the left and right sides of the wheel housing.
-
Remove the screws - 3 - from the wheel housing.
-
Remove the screws - 5 - and - 6 - from underneath.
A second technician is required for the rest of the removal procedure.
-
Pull the front bumper cover - 1 - out of the guides on the left and right sides of the fender - arrows a -.
-
Remove the front - 1 - parallel - arrows b - from the vehicle. A second technician is needed for this.
-
Disconnect harness connectors of installed electrical components.
-
Disconnect the hose coupling on the washer fluid hose.
Installation