Golf L4-2.0L DSL Turbo (CJAA) (2010)
‹› Always replace bolts after loosening them
5
Cover
6
Socket Head Bolt
‹› Installed from the inside of the vehicle
‹› Remove the lower A-pillar trim.
‹› Tightening specification: 50 Nm
‹› Always replace bolts after loosening them
7
Socket Head Bolt
‹› Tightening specification: 38 Nm
‹› Always replace bolts after loosening them
8
Cover
9
Socket Head Bolt
‹› Tightening specification: 50 Nm
‹› Always replace bolts after loosening them
10
Lower Spacer Plate
11
Adjustment Ring
‹› Provides the eccentric pin adjustment range.
12
Bolt
‹› For the eccentric bolts
‹› Tightening specification: 28 Nm
13
Door Hinge
‹› The door hinge is not separated.
‹› lubricate if the hinge is replaced, refer to => [ New Door Hinges, Lubricating ] See: Procedures
14
Socket Head Bolt
‹› Tightening specification: 50 Nm
‹› Always replace bolts after loosening them
15
Socket Head Bolt
‹› Tightening specification: 50 Nm
‹› Always replace bolts after loosening them
16
Cover
17
Socket Head Bolt
‹› Tightening specification: 38 Nm
‹› Always replace bolts after loosening them