Golf L4-2.0L DSL Turbo (CJAA) (2010)
Because of the high strength panel, modifying the body flanges does not fix the complaint.
By sticking two pads on the inner door seal, the B pillar trim will contact the seal and the gap closes.
Install Pad
Step 1:
Cut the pad (251 201 525) in two equal parts, illustration 2.
Step 2:
Stick the two pads on the inner door seal.
^
Pull the trim slightly off the seal and if necessary position it with a wedge.
Tip:
Stick pad 1 under the B pillar trim and pad 2 under the side trim, illustration 3. The point for sticking it on the door seal is the slightly serrated edge, see
red arrow.
Step 3:
Feed the trim back into the seal.