Golf L4-2.0L DSL Turbo (CJAA) (2010)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Bulkhead Assembly Overview
Plenum Chamber Bulkhead Assembly Overview
1
Plenum Chamber Bulkhead
‹› Removing:
-
Remove plenum chamber cover, refer to => [ Plenum Chamber Cover ] See: Plenum Chamber Cover.
-
Remove the screw - 5 - and the nut - 2 -.
-
Remove the plenum chamber bulkhead from the plenum chamber - 4 -.
2
Nut
‹› Quantity: 1
‹› Tightening specification: 8 Nm
3
Seal
‹› Make the seal fits correctly when installing the plenum chamber bulkhead.
4
Plenum Chamber
5
Bolt