Golf L4-2.0L DSL Turbo (CJAA) (2010)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Cover
Plenum Chamber Cover
Removing
-
Remove the wiper arms.
-
Remove the seal - 2 - over the entire length of the plenum chamber cover - 1 -.
CAUTION!
The window glass could be damaged.
Never use a screwdriver or a wedge or something similar to pry off the plenum chamber cover. The window glass could get damaged and
could crack later.
-
Lift off the plenum chamber cover - 1 - along the edge of the windshield by hand.
-
Remove the plenum chamber cover - 1 - from the binding profile - 5 - starting along the bottom of the windshield - 6 -.
-
Remove the plenum chamber cover - 1 - from the vehicle.
Installation
CAUTION!
The windshield - 6 - could break.
Using a hammer to install the plenum chamber - 1 - into the binding profile - 5 - on the windshield - 6 - can cause the windshield to crack.