Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Remove the wiring harness from the bracket on the longitudinal member so that it can be removed together with the steering gear.
-
Remove the footwell trim panel - 1 -.
-
Remove the bolt - 1 - and remove the universal joint - 2 - from the steering gear.
-
Remove the front wheels.
-
Remove lower noise insulation.
-
Disconnect the connector from the oil level thermal sensor (G266) and remove the wire on the subframe.
-
Remove exhaust system bracket from subframe - arrows -.