Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Secure the position of the subframes using 2 (T10096) to 20 Nm.
‹› (T10096) may only be tightened to a maximum of 20 Nm, since otherwise the threads of the locating bolts will be damaged.
-
Replace subframe bolts one after the other on both sides using (T10096) and tighten them to 20 Nm.
Position of subframe is now secured.
-
Lower subframe 10 cm using (V.A.G 1383 A).
-
Mark installation position of bonded rubber bushing to subframe, e.g. with a felt-tip pen.
-
Install special tools as depicted in the illustration.
1
Nut (T10263/5)
2
Washer, from ( T10263)
3
Tube (T10263/6)
4
Hydraulic Press (VAS 6178 ) with Pressure Head (T10205/13)
5
Nut (T10263/5)