Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Remove the support panel - 3 - from the crossmember - 4 -.
‹› When removing the crossmember, pay close attention to the position of the electrical wires and their mountings; if necessary make a sketch or take
photographs.
-
With a second technician, carefully remove the crossmember - 4 - from the vehicle.
Installation
-
To install, perform the steps used for removal in reverse order.
‹› Before installing the crossmember, line it up with the markings made before it was removed.