Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-1276002.png)
Installation
-
To install, perform the steps used for removal in reverse order.
Center A-Pillar Trim
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove side instrument panel cover. Refer to=> [ Instrument Panel Side Covers ] See: Utility Storage Compartment/Service and Repair.
-
Remove the trim panel - 1 - from the mounts in the body - arrow A -.
-
Pull trim upward out of lower A-pillar trim - arrow B -.
