Golf L4-2.0L DSL Turbo (CJAA) (2010)
Door Lock Cylinder: Service and Repair
Lock Cylinder Cover Cap
Lock Cylinder Cover Cap
Removing
‹› Do not turn the screwdriver to pry off the lock cylinder cap.
‹› The lock cylinder and cap are on the driver side only.
-
Gently insert a small screwdriver - 3 - - arrow a - into the hole on the bottom of the cap.
-
Gently remove the cap - 1 - from the door with the screwdriver - arrow b -.
-
Slide the cap upward and off the lock cylinder.
Installation
-
Place the lock cylinder cap - 2 - gently at an angle from above - arrow a - on the lock cylinder.