Golf L4-2.0L DSL Turbo (CJAA) (2010)
Brake Pedal Assy: Service and Repair
Brake Pedal
Brake Pedal
Removing
-
Remove the storage compartment from the trim mounts on the driver side.
-
Remove the footwell vent.
-
Remove the noise insulation - item 3 -=> [ Noise Insulation ] See: Brake Pedal Assembly Overview on the brake pedal, if applicable.
-
Disconnect the brake pedal from the brake booster. Refer to => [ Brake Pedal and Booster, Separating and Connecting ] See: Brake Pedal and
Booster, Separating and Connecting.
-
Remove the brake pedal.
Installing
-
Installation is performed in the reverse order of removal.