Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-581010.png)
-
Make sure that the brake pads are located correctly in the anti-rattle springs - arrows -.
-
Secure the brake caliper using new self locking bolts.
-
Install the wheel.
‹› The repair kit has 4 self locking bolts for installing the brake caliper. Always use these.
‹› After replacing the brake pads, firmly press the brake pedal several times with the vehicle stationary so that the brake pads are properly seated in
their normal operating position.
‹› Check the brake fluid level after replacing the brake pads.
CII 41 Brake Caliper
Special tools, testers and auxiliary items required
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Brake Pedal Actuator (V.A.G 1869/2)
Removing
Work procedure applies only for replacing or when performing subsequent service work on the brake caliper.
