Golf L4-20L DSL Turbo (CJAA) (2010) Brake Caliper Service and Repair Procedures
-
Close the bleeder valve and remove the bleeder bottle.
-
Loosen the threaded connection for the brake line - 3 - to the brake hose - 2 -.
-
Remove the clamp - 1 - and remove the brake hose - 2 - from the bracket.
-
Counter hold the guide pins and remove both bolts from the brake caliper.
-
Remove the brake caliper from the brake carrier.
Installing
‹› Piston is pressed in.
‹› Brake pads sit in the anti-rattle springs on the brake carrier.
-
Install the brake caliper to the brake carrier using new self locking bolts.
-
Install the brake line - 3 - and the brake hose - 2 - and secure with the clamp - 1 -.