Golf L4-2.0L DSL Turbo (CJAA) (2010)
reservoir has been topped off, fluid will overflow and cause damage.
-
Install the piston by turning the knurled knob on the ( T 10165 ) clockwise, do not damage the protective cap.
-
Use (T 10165/1)for assistance when installing.
‹› For pistons that are difficult to move, a 13 mm open end wrench can be used at the appropriate wrench surface - arrow A -.
-
Remove the protective foil on the brake pad backing plates.
-
Install the brake pads in the brake carrier.
When installing the brake caliper, make sure that the brake pads are not affixed to the brake caliper before the correct installed position has been
reached.
-
Secure the brake caliper using new self locking bolts.
‹› The repair kit includes 4 self locking bolts which must be installed in all cases.
-
Install the wheel.
‹› After replacing the brake pads, firmly press the brake pedal several times with the vehicle stationary so that the brake pads are properly seated in
their normal operating position.
‹› Check the brake fluid level after replacing the brake pads.