Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-387004.png)
-
If necessary, remove dirt or coolant from heater, for example after removing leaky heater core.
-
Push heater core into heater.
‹› Always replace the seals - 1 -.
-
Coat sealing rings - 1 - with coolant before installing.
‹› If pipe clamps are deformed, replace them.
-
Connect coolant pipes to heater core.
-
Pipe clamps - A - must be able to be twisted slightly when installing onto the coolant pipes.
-
Pipe clamps - A - must be installed as shown in the illustration.
