Golf L4-2.0L DSL Turbo (CJAA) (2010)
Water Pump: Service and Repair
Coolant Pump
Special tools, testers and auxiliary items required
‹› Refractometer (T10007)
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Hose Clip Pliers (VAS 6340)
Removing
‹› Always replace gaskets and seals.
-
Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] See: Service and Repair/Cooling System, Draining and Filling.
-
Remove the ribbed belt. Refer to one of the following:
=> [ Ribbed Belt, with Tensioner ] See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt,
With Tensioner.
=> [ Ribbed Belt, with Tensioning Roller ] See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed
Belt, With Tensioning Roller.
-
Remove the toothed belt. Refer to => [ Toothed Belt ] See: Engine/Timing Components/Timing Belt/Service and Repair/Toothed Belt.
-
Remove the bolts - 1 - for the coolant pump - 2 - and carefully take out the coolant pump.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
Lubricate the new O-ring - 3 - with coolant.