Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-286007.png)
-
Remove the camshafts with the bearing frame and the (T40095 ) from the (T40094).
-
Carefully insert the camshafts and bearing frame in the cylinder head.
-
Tighten the bearing frame bolts by hand in sequence - 1 through 24 -.
‹› The bearing frame must be in contact with the entire contact surface of the cylinder head.
-
Tighten the bearing frame bolts in sequence - 24 through 1 - until seated. Tightening specification: 10 Nm.
