Volkswagen Workshop Service and Repair Manuals

‹› The hole inside the vibration damper must be positioned over the protrusion on the crankshaft toothed belt gear.

4

Bolt

‹› 10 Nm + 90° (1/4) additional turn.

‹› Always replace.

‹› Use original bolts.

5

Alignment Bushing

‹› Make sure the accessory bracket fits correctly.

6

Bolt

‹› 20 Nm + 90° (1/4) additional turn.

7

Bolt

‹› 50 Nm + 90° (1/4) additional turn.

8

Idler Roller

‹› For the toothed belt.

9

Adjusting Bolt

‹› 15 Nm

10

Idler Roller

‹› For the toothed belt.

11

Accessory Bracket

‹› Removing and installing, refer to => [ Accessory Bracket ] See: Engine Accessory Bracket/Service and Repair.

12

High Pressure Pump

‹› Removing and installing, refer to => [ High Pressure Pump ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service

and Repair/High Pressure Pump.

13

Bolt

‹› Tightening specification and sequence, refer to => [ Accessory Bracket Bolt

Tightening Sequence and Specification ] See: Engine Accessory Bracket/Service and Repair.

14

Generator

15

Bolt

‹› 20 Nm

16

Air Conditioning (A/C) Compressor

17

Bolt

‹› 45 Nm

18

Alignment Bushing

‹› Make sure the accessory bracket fits correctly.

19

Bolt