Golf L4-2.0L DSL Turbo (CJAA) (2010)
Drive Belt: Service and Repair
Generator
Ribbed Belt Pulley Without Freewheel
Generator
Ribbed Belt Pulley without Freewheel
Special tools, testers and auxiliary items required
‹› Socket (VAS 3310)
‹› Torque Wrench (V.A.G 1332)
Removing:
-
Remove generator. Refer to => [ Generator ] See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement.
-
Tighten the generator in a vise at the attachment points.
-
Use the socket to remove the ribbed belt pulley nut from the generator shaft.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten the threaded connection to 65 Nm.
Ribbed Belt Pulley With Freewheel, Bosch
Generator
Ribbed Belt Pulley with Freewheel, Bosch
Special tools, testers and auxiliary items required
‹› Multi-point adapter (VAS 3400)
‹› Torque Wrench (V.A.G 1332)
Removing:
-
Remove generator. Refer to => [ Generator ] See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and