Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-328002.png)
-
Remove the auxiliary fuel pump (V393) (the fuel lines remain connected). Refer to => [ Auxiliary In-Line Electric Fuel Pump ] See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair/Auxiliary In-Line Electric Fuel Pump.
-
Install the (10-222 A) with the necessary adapters as illustrated and support the engine in the installed position.
‹› The engine/transmission mount bolts may only be loosened when the engine is supported with the (10-222 A).
-
Replace the engine mount to bracket bolts - arrows - one after the other (if not already done) and tighten them by hand.
