Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Apply silicone sealant to the clean sealing surfaces of the oil pan as shown. The sealing compound bead must be:
‹› 2 to 3 mm thick
‹› and run on the inside of the bolt holes - arrows -
CAUTION!
The lubrication system could be plugged with excess sealant.
‹› Do not apply a sealant bead thicker than indicated.
-
Apply the bead of sealant as illustrated to the clean sealing surface of the oil pan.
‹› Sealant bead thickness: 2 to 3 mm.
‹› Being especially careful, apply a bead of sealant around the sealing flange - arrows -.
‹› The oil pan must be installed within 5 minutes after applying the sealant.