Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Loosen the knurled bolt and turn the inner part against crankshaft until the oil seal is pulled out.
Installing
‹› The sealing lip of the seal may not be additionally oiled or greased.
-
Before installing, remove any remaining oil from the end of the crankshaft with a clean cloth.
-
Place the (T10053/1) on the crankshaft.
-
Push the seal over the (T10053/1) onto the end of the crankshaft.
-
Press the seal in until seated using (T10053) and the center bolt.