Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Secure the high pressure pump hub using (3359). To do that, slide the (3359) into the hole outside the toothed belt sprocket.
-
Rotate the camshaft sprocket and high pressure toothed belt sprocket clockwise in their slots as far as the stop.
-
Install the toothed belt on the crankshaft sprocket, the tensioning roller, the camshaft sprocket, coolant pump toothed belt sprocket and the high
pressure toothed belt sprocket.
-
Lay the toothed belt on the tensioning roller last.
-
Loosen the tensioning roller nut and remove the (T10265 ).
‹› Make sure the tensioning roller is properly positioned in the rear toothed belt guard - arrow -.