Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Install the vibration damper, tightening specification - 10 Nm + 90° (1/4) additional turn.
-
Install the ribbed belt. Refer to one of the following:
=> [ Ribbed Belt, with Tensioner ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt, With
Tensioner.
=> [ Ribbed Belt, with Tensioning Roller ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt,
With Tensioning Roller.
-
Install the upper toothed belt guard.
The rest of the installation is basically a reverse of the removal sequence. When doing this note the following:
‹› Ensure the fuel hoses are seated securely.
‹› Do not interchange the supply and return lines (the return line is blue or has a blue mark, the supply line is white).
-
Install the wheel housing liner.
-
Install the noise insulation.