Golf L4-2.0L DSL Turbo (CJAA) (2010)
Heater Core: Service and Repair
Heat Exchanger Coolant Pipe
Heat Exchanger Coolant Pipe
‹› The heater must be removed first in order to replace the coolant pipes leading from the engine compartment to the heat exchanger. Refer to => [
Heating and A/C Unit ] See: Service and Repair/Removal and Replacement/Refrigerant Circuit Specialized Repairs.
Removing
-
Remove the screw - 1 - on the connecting flange between the heat exchanger connections.
-
Remove screws - A - and remove trim - B -.
-
Open pipe clamps - A - and disconnect coolant pipes from heater core.