Golf L4-2.0L DSL Turbo (CJAA) (2010)
Installing
-
Coat sealing rings - 1 - with coolant before installing.
-
Insert sealing rings - 1 - into connection on heater core.
‹› Ensure sealing rings are installed on the proper side, as shown in the illustration.
‹› If pipe clamps are deformed, replace them.
-
Connect coolant pipes to heater core.
‹› Always replace the seals - 1 -.
-
Coat sealing rings - 1 - with coolant before installing.
‹› If pipe clamps are deformed, replace them.
-
Pipe clamps - A - must be able to be twisted slightly when installing onto the coolant pipes.