Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-1405001.png)
Instrument Cluster / Carrier: Description and Operation
Instrument Cluster General Information
Instrument Cluster General Information
‹› Additional information:
423Golf 2009
General description:
The following components are integrated in the instrument cluster:
‹› Instrument Cluster Control Module (J285)
‹› Anti-Theft Immobilizer Control Module (J362)
‹› Speedometer
‹› Tachometer
‹› Fuel gauge
‹› Coolant temperature gauge
‹› Multifunction indicator
‹› Indicator lamps, refer to => [ Warning Lamp Symbols in Instrument Panel Insert ] See: Locations/Warning Lamp Symbols In Instrument Panel
Insert
To audibly support the visual displays of the instrument panel insert, the control module activates a warning buzzer.
All indicator lamps have LEDs. Servicing the instrument cluster is not planned. In the event of malfunctions, the complete instrument cluster must be
replaced. Refer to => [ Instrument Cluster ] See: Testing and Inspection.
The Data Bus On Board Diagnostic Interface (J533 ) (Gateway) is designed as a separate control module and not a component of the instrument
cluster as it is for various other vehicles. Refer to => [ Data Bus On Board Diagnostic Interface, Gateway ] See: Body and Frame/Locks/Door
Locks/Door Module/Description and Operation.
DTC recognition and display:
The instrument cluster is equipped with OBD capabilities which assists with troubleshooting.
Use the Vehicle Diagnosis, Testing and Information System (VAS 5051A) under Guided Fault Finding.
