Golf L4-2.0L DSL Turbo (CJAA) (2010)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor
Removing
-
Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Fuel Delivery Unit.
-
Disengage the connector prongs of the wires - 3 and 4 - and disconnect.
-
Pry up the retaining tabs - 1 and - using a screwdriver and remove the fuel level sensor downward - arrows -.
Installing
-
Install the fuel level sensor into the guides on the fuel delivery unit and push it upward until it engages.