Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Disconnect the connector - arrow - and remove the fog lamp housing.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten the threaded connections to the tightening specification given in the assembly overview. Refer to => [ Fog Lamp, Golf, Assembly
Overview ] See: Fog Lamp, Golf, Assembly Overview.
-
Check headlamp for function.
-
Check the fog lamp position and adjust if necessary.
Fog Lamp Bulb and Static Cornering Lamp, Golf
‹› The bulb in the fog lamp housing works either as a static cornering lamp or a fog lamp depending on the control.
‹› The illustration shows the procedure for removing and installing the left fog lamp.
Removing:
-
Remove fog lamp.
-
Turn the bulb socket with the fog lamp bulb/static cornering lamp - 1 - in direction of - arrow - and remove it from the fog lamp.
The fog lamp bulb and the bulb socket are a single piece and cannot be replaced separately.
Fog lamp bulb: HB4 12V, 51W