Golf L4-2.0L DSL Turbo (CJAA) (2010)
Horn: Service and Repair
Horns
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove noise insulation.
-
Disconnect the connector - arrow -.
-
Remove the screw - arrow - and remove the horn and bracket.
Installing:
Install in reverse order of removal, noting the following:
‹› When installing, position the horn so that it does not touch any surrounding components.
-
Tighten the screws that attach the bracket to the longitudinal member, to 20 Nm.