Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Install the screws by hand (2.5 Nm maximum) and connect the connector.
-
Check the gap dimensions in the body and make sure the tail lamps work correctly.
Side Panel Tail Lamp Bulb Holder
Tail Lamps
Side Panel Tail Lamp Bulb Holder
Removing:
-
Remove tail lamp assembly in side panel. Refer to => [ Side Panel Tail Lamps ]. See: Side Panel Tail Lamps
-
Release each tabs - 1 -, - 2 -, - 3 -, - 4 - and - 5 - in direction of - arrow - and remove the bulb holder - 6 - from the tail lamp housing.
Installing:
Install in reverse order of removal, noting the following:
-
Make sure all the tabs are latched correctly after installing the bulb holders.
Brake/Tail Lamp and Turn Signal Lamp, Tail Lamp Assembling In Side Panel, Replacing Bulbs
Tail Lamps
Brake/Tail Lamp and Turn Signal Lamp, Tail Lamp Assembling in Side Panel, Replacing Bulbs