Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Disengage and disconnect harness connector - 1 -.
-
Remove the screw - 2 - and remove the tail lamp assembly inside the side panel through the opening in the body.
Installing:
Install in reverse order of removal, noting the following:
‹› When inserting the tail lamp assembly into the opening in the body, be sure to slide it into the upper - 1 - and lower - 2 - guides correctly.
-
Install the tail lamp assembly screws by hand (2.5 Nm maximum) and connect the connector.