Golf L4-2.0L DSL Turbo (CJAA) (2010)
Turn Signal Switch: Service and Repair
Steering Column Switch, through 05.10
Turn Signal switch
CAUTION!
The removal and installation of individual steering column switch components must be done in the specified sequence. Refer to => [
Steering Column Switch Components ]. See: Accessories and Optional Equipment/Steering Mounted Controls Communication Module/Service
and Repair/Steering Column Switch, Through 05.10/Steering Column Switch Components
‹› Turn signal switch consists of the components Turn Signal switch, Headlamp Dimmer/Flasher Switch and depending on equipment, Cruise Control
Switch.
‹› For reasons of clarity, steering column switches with Cruise Control Switch are depicted as removed in the illustration.
Removing:
-
Release retaining clips - arrows - using a 1.0 mm feeler gauge - 1 - and remove turn signal switch toward rear (toward rear of vehicle).
Installing:
Install in reverse order of removal, noting the following:
‹› Turn signal switch must engage audibly.