Golf L4-2.0L DSL Turbo (CJAA) (2010)
Drive Belt: Service and Repair
Ribbed Belt Assembly Overview, With Tensioning Roller
Ribbed Belt Assembly Overview, with Tensioning Roller
1
Ribbed Belt
‹› Check for wear.
‹› Before removing, mark the direction of rotation using chalk or a felt tip marker.
‹› Removing and installing, refer to => [ Ribbed Belt, with Tensioning Roller ] See: Ribbed Belt, With Tensioning Roller.
‹› Do not kink.
‹› When installing, make sure it is seated correctly on the pulleys.
2
Ribbed Belt Tensioning Roller
‹› Removing and installing, refer to => [ Ribbed Belt, with Tensioning Roller ] See: Ribbed Belt, With Tensioning Roller.
‹› Apply some adhesive lubricating paste to the guide surfaces.
3
Vibration Damper
‹› With the pulley for the ribbed belt.
‹› Assembly is only possible in one position because of the offset holes.