Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Turn around handle part - 2 - of torque wrench 180° and insert socket again.
-
Set turning direction of torque wrench to left at socket.
-
Insert TORX screwdriver insert into generator shaft.
-
Counter hold the Multi-point adapter using a 17 mm open end wrench.
-
Tighten ribbed belt pulley with freewheel by turning generator driveshaft toward left using torque wrench.
-
Tighten the threaded connection to 80 Nm.