Golf L4-2.0L DSL Turbo (CJAA) (2010)
Tires, Dismounting
CAUTION!
‹› Note the safety precautions. Refer to => [ Run-Flat Tires Safety Precautions ] See: Service and Repair/Procedures/Run-Flat Tires
Safety Precautions.
-
Turn wheel on tire mounting device so that tire valve/tire pressure sensor - 2 - stands in front of mounting head - 1 -.
CAUTION!
Mounting head - 1 - must not be located in area - a - of tire valve/tire pressure sensor, otherwise the mounting head will damage the tire pressure
sensor.
-
Position mounting head - 1 - in vicinity of tire valve/tire pressure sensor so that tire iron can be put on approximately 30° next to tire valve/tire
pressure sensor - 2 -.
-
Install press holders - 3 - on disc wheel opposite the mounting head - 1 -.
-
Now pry tire bead over mounting finger on mounting head using tire iron and remove tire iron again.
-
Let the tire dismounting/mounting machine run clockwise until upper bead lies completely above the rim flange.