Golf L4-2.0L DSL Turbo (CJAA) (2010)
Engine Control Module: Service and Repair
Engine Control Module Without Anti-Theft Immobilizer
Engine Control Module without Anti-Theft Immobilizer
If replacing the Engine Control Module (ECM) , then connect the vehicle diagnosis, testing and information system VAS 5051 and perform Guided
Function "Replace Control Module".
Removing
-
Turn off the ignition.
-
Remove the windshield wiper arms.
-
Remove the plenum chamber bulkhead.
-
Push the retaining frame in the - direction of the arrow - downward and remove the ECM.
-
Push the retainers in the - direction of the arrow - and disconnect the connector.
Installing
-
Connect the connector to the ECM and push the retainers all the way in the - direction of the arrow -.