Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Position the (3314) with the groove - arrow A - on the upper collar of the connector - arrow B - and press together lightly.
CAUTION!
Position the (3314) so they do not touch or damage the cable.
Only use suitable tools.
Other unsuitable tools can damage the connector.
If the connector is damaged when removing it, replace the complete wiring harness including the connector (a connector cannot be
replaced separately).
-
Carefully pull the connector off the glow plug in the - direction of the arrow - using (3314).