Golf L4-2.0L DSL Turbo (CJAA) (2010)
Installing
Installation is performed in the reverse order of removal, noting the following:
‹› Engine speed (RPM) sensor bolt tightening specification, refer to - item 9 -=> [ ] See: Engine, Cooling and Exhaust/Engine/Seals and
Gaskets/Crankshaft Main Bearing Seal/Service and Repair/Sealing Flanges and Flywheel Assembly Overview.
‹› Oil filter bracket bolt tightening specification, refer to => [ Oil Filter Bracket and Oil Cooler Assembly Overview ] See: Engine, Cooling and
Exhaust/Engine/Engine Lubrication/Oil Filter Housing/Service and Repair/Oil Filter Bracket and Oil Cooler Assembly Overview.
-
Check the coolant level; top off if necessary. Refer to => [ Cooling System, Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair/Cooling System, Draining and Filling.