Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-431003.png)
-
Install the fuel filter upper section and seal on the fuel filter lower section and then press on it evenly.
CAUTION!
Do NOT tighten the bolts for the upper section until it is in complete contact with the lower section.
-
Tighten all bolts to the fuel filter lower section hand tight.
-
Tighten the bolts to specification and in the sequence shown in the illustrations - arrows -. Refer to - item 2 -=> [ Bolt ] See: Fuel Filter Assembly
Overview.
