Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Release the connector lock and remove the airbag connector - 2 -.
-
Press connector lock and disconnect connector - 1 -. This is necessary only on the multifunction steering wheel.
Installation
-
Insert airbag connector - 2 - into connector coupling. Airbag connector must engage audibly.
-
Insert connector - 1 - into connector coupling. This is necessary only on the multifunction steering wheel.
-
Push airbag unit into steering wheel.
-
Check whether airbag unit is engaged on the left and right-hand side of the steering wheel.