Golf L4-2.0L DSL Turbo (CJAA) (2010)
Seat Belt: Procedures
Seat Belts, Inspecting
CAUTION!
After every accident the seat belt system must be inspected systematically! If damage is determined when inspecting the check points,
customer must be informed regarding necessity of changing belts.
Check points:
‹› Belt Webbing, Checking
‹› Retractor, Checking Locking Function
‹› Belt Latch, Inspecting Visually
‹› Belt Latch Function, Testing
‹› Belt Guide Rings and Locking Tongue, Checking
‹› Securing Components and Anchorage Points, Checking
Checking Belt Webbing
-
Pull belt completely out of retractor or lap belt adjustment tongue.
-
Inspect belt webbing for contamination and, if necessary, wash with mild soap solution.
‹› If any of the following illustrated damage examples (1 and 2) are discovered on an accident vehicle - replace complete seat belt with seat belt latch
and belt height adjuster.
‹› If one kind of damage under points 1, 2, 3 and 4 is detected on a vehicle which has not been in an accident, only the damaged seat belt needs to be
replaced.
‹› Belt webbing cut, torn or chafed.
‹› Webbing loops on belt edge torn.