Golf L4-2.0L DSL Turbo (CJAA) (2010)
Front Seat Belt Height Adjuster
Seat Belts
Front Seat Belt Height Adjuster
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Table of Contents
‹› Belt anchor or anchor rail does not need to be removed on seat belt.
-
Remove bolt - 1 - (40 Nm) and remove belt relay - 2 - from belt height adjuster.
-
Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.
Installation
-
To install, perform the steps used for removal in reverse order.
Belt Latch, 2-Door
Seat Belts