Golf L4-2.0L DSL Turbo (CJAA) (2010)
‹› Key must be located in Drive position.
Key positions of lock cylinder:
1
Position Off
2
Position Run
3
Position Start
-
Install all the components in reverse order of removal.
Ignition Switch Key Lock Solenoid
The ignition switch key lock solenoid must be mounted next to the ignition switch.
‹› To remove key on a vehicle with a DSG transmission, move the selector lever into P and then switch off the ignition. Otherwise, ignition switch
key lock solenoid prevents the key from being removed!
Removing:
-
Remove Steering Column Electronic Systems Control Module. Refer to => [ Steering Column Electronic Systems Control Module ] See:
Accessories and Optional Equipment/Steering Mounted Controls Communication Module/Service and Repair/Steering Column Switch, Through
05.10.
-
Release locking device - 2 - using a suitable screwdriver.