volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Severely Discharged Batteries|Page 2477 > < Severely Discharged Batteries|Page 2475
Page 4
background image

There is a risk of explosion during testing, charging or jump starting. 

These batteries must be replaced.

-

Turn off the ignition and all electrical consumers.

-

Check the visual indicator. Refer to => [ Battery with Visual Indicator, Checking ] See: Battery With Visual Indicator, Checking.

-

Switch on the unit.

-

Clamp the red clamp + of the tester to the positive terminal.

-

Clamp the black clamp - on the tester to the negative terminal. 

‹› Make sure the test clamps make good contact!

-

Select the following:

‹› Maintenance test (only on new vehicles before becoming inventory, refer to => [ Battery Tester with Printer, Maintenance Test ] See: Battery

Tester With Printer, Maintenance Test)

‹› Service test, refer to => [ Battery Tester with Printer, Service Test ] See: Battery Tester With Printer, Service Test

‹› Warranty test, refer to => [ Battery Tester with Printer, Warranty Test ] See: Battery Tester With Printer, Warranty Test

‹› The test is over after approximately 10 seconds.

‹› The results of the test are output through the printer.

‹› It is not necessary to let the tester cool down before performing the next measurement.

Battery Tester With Printer, Maintenance Test

Battery Tester with Printer, Maintenance Test

CAUTION!
Batteries that have a colorless or light yellow visual indicator do not have to be tested or charged. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting. 

These batteries must be replaced.

-

Select maintenance test.

-

Connect the scanner.

‹› If there is no scanner, manually enter the VIN on the printed test results.

-

Scan the VIN.

-

Select at the battery pole or at the battery jump start terminal. 

-

Scan the barcode or manually select the type and manufacturer in the menu.

-

Measure the temperature. Hold the temperature sensor approximately 5 cm above the terminal connection until the temperature is stable.

-

Start the test.

-

Print out the test report if necessary.

Battery Tester With Printer, Service Test

Battery Tester with Printer, Service Test

Severely Discharged Batteries|Page 2477 > < Severely Discharged Batteries|Page 2475